Prospector™ BOP 5000

This hose is a hydraulic control connection that is used in the well control system.

Verification:
ContiTech specifically adheres to API Apec 16D, 3rd edition,Sections 14.2.5 & 14.6.2 which are defined as:
- _{Sections 14.2.5 Hoses and Hose Connections – “Burstpressure for hoses shall be determined by actual pressure test conducted on lotsamples and certified by the hose manufacturer. This testing shall include endconnections if permanently attached. The hose assembly shall be tested to 1.5times the rated working pressure.”}
- _{Section 14.6.2 Fire Tests – “The control hose and any component of the control hose to a surface-mounted BOP stack or diverter, located in a division one area, as defined by API 500 or a Zone 1 area defined by API 505, shall be capable of containing the hose rated working pressure in a flame temperature of 1300°F (704°C) for a 5-minute period.”}

Got questions?

SAP	Product	ID	ID	OD	Max Working Pressure	Bend Radius	Min Burst Pressure	Fitting Type	Weight (lb/ft)
		Fraction	inch	inch	PSI	inch	PSI
20715121	BOP5000-06	3/8	0.38	1.14	5000	7.10	20000	UC	0.8
20715122	BOP5000-08	1/2	0.50	1.24	5000	9.00	20000	UC	0.9
20715123	BOP5000-12	3/4	0.75	1.58	5000	11.80	20000	UC	1.6
20715124	BOP5000-16	1	1.00	1.85	5000	13.40	20000	DG	2
20715125	BOP5000-20	1-1/4	1.25	2.10	5000	18.10	20000	DG	2.4
20715126	BOP5000-24	1-1/2	1.50	2.59	5000	19.70	20000	DG	4.1
20715127	BOP5000-32	2	2.00	3.14	5000	24.80	20000	DG	5.5

SAP	Product	ID	ID	OD	Max Working Pressure	Bend Radius	Min Burst Pressure	Fitting Type	Weight (lb/ft)
		Fraction	mm	mm	PSI	mm	PSI
20715121	BOP5000-06	3/8	10.00	29.00	34.5	180.00	140.00	UC	0.8
20715122	BOP5000-08	1/2	12.00	31.60	34.5	230.00	140.00	UC	0.9
20715123	BOP5000-12	3/4	20.00	40.10	34.5	300.00	140.00	UC	1.6
20715124	BOP5000-16	1	25.00	46.90	34.5	340.00	140.00	DG	2
20715125	BOP5000-20	1-1/4	31.80	53.40	34.5	460.00	140.00	DG	2.4
20715126	BOP5000-24	1-1/2	38.00	65.90	34.5	500.00	140.00	DG	4.1
20715127	BOP5000-32	2	51.00	79.70	34.5	630.00	140.00	DG	5.5